The most


Hybrid solar panel

The first generation ECOVOLT hybrid panels incorporate a high-efficiency photovoltaic laminate with a new heat recovery design, that enables thermal energy to be produced while the PV laminate cools. The absence of a cover reduces the operating temperature of this panel, which maximizes its electrical output and improves its operation in hot climates. The result is a compact and lightweight hybrid panel, with dimensions identical to a conventional photovoltaic panel, capable of producing heat and electricity even in adverse climates.


Dual production of heat and electricity

reduction in the capture surface

high electrical efficiency due to monocrystalline cells

emissions reduction

General features

Cell size156x156 mm
Cell number60 mono
Front Glass3.2 mm tempered glass
Weight30.5 kg
Dimensions (LxWxT)1640x992x40 mm
Junction boxllP67
Cable length1000 mm
Cable section4 mm2
Diodes number3
ConnectorsMC4 compatible
FrameAnodized aluminum
Collection surface1.55 m2

Thermal specifications

Maximum pressure6 bar
Fluid Volume0.88 L
Optical performance (η0)0.472
Heat loss coefficient, a19.5 W/m2k
Heat loss coefficient, a20 W/m2k2
Pressure loss0.06 bar

Electric specifications

Values ​​tested under STC Standard Conditions (AM 1.5, lradiance 1000 W/m2, Cell temperature 25ºC)
Maximum Power (Pmax)300 Wp
Nominal Voltage (Vmp)32.50 V
Maximum Power Current (lmax)9.25 A
Open Circuit current (Voc)38.80 V
Short Circuit current (lsc)9.85 A
Tolerance0 + 4.99 Wp
Module Efficiency18.44%
Maximum system voltageDC 1000 V (TUV)
Working Temperature-40ºC / +85ºC
Maximum reverse current15A
Maximum wind/snow load2400Pa/5400Pa
Protection degree IPIP65
Safety classII
Voltage temp. coefficient-0.31%/K
Current temp. coefficient+0.03%/K
Power temp. coefficient-0.39%/K

Packing information

Pallets per container122828
Units per container300700770

High electrical performance

A common problem with photovoltaic panels is the loss of electrical performance when the panel increases in temperature. When it happend, the efficiency of the panel is reduced by up to 0.4% for each degree of increase in photovoltaic cells.

In a hybrid panel, the water cools the back, limiting the maximum temperature of the laminate. ECOVOLT hybrid panels are additionally made of a highly efficient monocrystalline silicon cell laminate and do not incorporate a cover on the front, allowing excess heat to escape. This configuration guarantees a good operation of the panel even in the warmest climates, where the rest of the photovoltaic panels have limitations.

Limited surface, greater performance

The use of hybrid solar panels allows us to reduce the necessary collection area by up to 40% compared to traditional solar systems, made by photovoltaic modules and thermal collectors. ECOVOLT hybrid panels have the same exterior size as a conventional photovoltaic panel (surface and thickness), which makes possible to optimize space and even reuse existing photovoltaic installations, but produces both types of energy.

The superior electrical performance of this hybrid panel model represents significant economic savings in energy consumption, as well as significantly reducing emissions into the atmosphere.

Why to install ECOVOLT solar panels

If we want to bet for the climate and choose renewable energies, nowadays opting for solar energy is a guarantee of success, both economically and environmentally.

ECOVOLT hybrid solar panels are a safe bet for those places where you want to encourage electricity production. Its innovative design allows to combine the production of electrical and thermal energy in a panel of standard PV dimensions, optimizing the surface and maximizing the energy production per m2. Its high-efficiency laminate and exterior design guarantee good electrical performance even in hot weather.

With the installation of ECOVOLT hybrid panels, the savings in the energy bill and the conservation of the environment are effective from the first day.